Monel K500 Butt weld Fittings, ASTM B366 Fittings, ASME B16.9 Monel K500 Pipe Elbow, UNS N05500 Reducer, DIN 2.4375 Buttweld Fitting, Monel K500 Stub End Supplier in Mumbai, India.

Shri Bhairav is a recognized distributor of Monel Alloy K500 Pipe Fittings, which is spark resistant and non-magnetic to -200° F. Monel K500 Elbow Pipe Fittings has a greater tendency toward stress-corrosion cracking in some environments. However, Monel K500 Tee Pipe Fittings is possible to develop a magnetic layer on the surface of the material during processing. Aluminium and copper in Monel K500 Cross Pipe Fittings may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Monel K500 Reducer Pipe Fittings has excellent resistance to high velocity sea water and is very much non-magnetic alloy. Monel K500 Bend Pipe Fittings also has resistant to a sour-gas environment, where its melting range is 2400-2460° F. 

Monel K500 Pipe Bend Stockist, Alloy K500 Buttweld Elbow Exporter, Monel K500 ASTM B366 Buttweld Pipe Fittings, Monel K500 Pipe Fittings in India.

Monel K500 Stub End Pipe Fittings has excellent mechanical properties from sub-zero temperatures up to about 480 Deg C. The combination of very low corrosion rates in high-velocity sear water and high strength make Monel K500 End Cap Pipe Fittings particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling in Monel K500 Dish Cap Pipe Fittings may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.

Monel K500 Seamless Fittings Price, Alloy K500 Lap Joint Stub Ends Distributors, WERKSTOFF NR. 2.4375 Piggable Bend Trader, Monel K500 Pipe Cap Dealer, K500 Monel Welded Fittings Manufacturer in India.

Monel K500 Lateral Tee Pipe Fittings have approximately three times the yield strength and double the tensile strength. Monel K500 Eccentric Reducer Pipe Fittings can be further strengthened in addition by cold working prior to precipitation hardening.

ASTM B366 Monel K500 Pipe Fittings Types

 Monel K500 Elbow

  • K500 Monel Alloy 1D Elbow
  • ASME B16.9 Monel K500 1.5D Elbow
  • ASTM A366 Alloy K500 3D Elbow
  • K500 Monel 5D Elbow
  • UNS N05500 Elbow
  • DIN 2.4375 Elbow

Monel K500 45 Deg Elbow

  • Monel K500 ASTM A366 45 Deg Elbow
  • ASME B16.9 Monel K500 45 Deg. Elbow
  • ASTM A366 Monel K500 Elbow 45 Degree
  • UNS N05500 45° Elbow
  • DIN 2.4375 45 Deg. Elbows

Monel K500 90 Deg. Elbow

  • Monel K500 ASTM A366 90 Deg Elbow
  • ASME B16.9 Monel K500 90 Deg. Elbow
  • ASTM A366 Alloy K500 Elbow 90 Degree
  • DIN 2.4375 90° Elbow
  • UNS N05500 90 Deg Elbow

Monel K500 180 Deg Elbow

  • Monel K500 ASTM A366 180 Deg Elbow
  • ASME B16.9 Monel K500 180 Deg. Elbow
  • ASTM A366 Monel K500 Elbow 180 Degree
  • UNS N05500 180° Elbow
  • DIN 2.4375 180 Deg. Elbows

Monel K500 Tee

  • ASTM A366 Monel K500 Tee
  • ASME B16.9 Monel K500 Equal Tee
  • ASME SB366 Monel K500 Unequal Tee
  • UNS N05500 Reducing Tee
  • DIN 2.4375 Buttweld Tee
  • ASTM A366 Alloy K500 Pipe Tee

Monel K500 Concentric Reducer

  • ASTM A366 Monel K500 Concentric Reducer
  • B16.9 Monel K500 Concentric Reducer
  • ASME SB366 Alloy K500 Concentric Reducer
  • N05500 Concentric Reducer
  • DIN 2.4375 Concentric Reducer
Stainless Steel 304 Eccentric Reducer

Monel K500 Eccentric Reducer

  • ASTM A366 Monel K500 Eccentric Reducer
  • B16.9 Monel K500 Eccentric Reducer
  • ASME SB366 Alloy K500 Eccentric Reducer
  • N05500 Eccentric Reducer
  • DIN 2.4375 Eccentric Reducer
  • K500 Monel Eccentric Reducer
Stainless Steel 304 Long Radius Elbow

Monel K500 Long Radius Elbow

  • ASTM A366 Monel K500 LR Elbow
  • ASME B16.9 Monel K500 90 deg LR Elbow
  • ASME SB366 Alloy K500 45 deg. Long Radius Elbow
  • UNS N05500 Long Radius Elbow
  • DIN 2.4375 Long Radius Elbow
  • ASTM A366 Monel K500 180 deg LR Elbow
Stainless Steel 304 Short Radius Elbow

Monel K500 Short Radius Elbow

  • ASTM A366 Monel K500 SR Elbow
  • ASME B16.9 Monel K500 90 deg Short Radius Elbow Elbow
  • ASME SB366 Monel K500 45 deg. SR Elbow
  • UNS N05500 Short Radius Elbow
  • DIN 2.4375 Short Radius Elbow
  • ASTM A366 Alloy K500 180 deg Short Radius Elbow
ASTM A403 Stainless Steel WP304 Stub End

Monel K500 Stub End

  • ASTM A366 Monel K500 Stub End
  • ANSI B16.9 Monel K500 Short Stub End
  • ASME SB366 Alloy K500 Long Stub End
  • UNS N05500 Stub Ends
  • DIN 2.4375 Stub End
ASTM A403 WP304 SS Cap

Monel K500 Cap

  • ASTM A366 Monel K500 Cap
  • ASME B16.9 Monel K500 End Cap
  • ASME SB366 Alloy K500 End Pipe Cap
  • UNS N05500 Pipe End Cap
  • DIN 2.4375 Butt Weld Cap
ASTM A403 WP304 SS Cross

Monel K500 Cross

  • ASTM B366 Monel K500 Cross
  • ASME B16.9 Monel K500 Equal Cross
  • ASME SB366 Alloy K500 Unequal Cross
  • UNS N05500 Reducing Cross
  • DIN 2.4375 Buttweld Cross
  • K500 Monel Pipe Cross

Standard Specification For ASTM B366 Monel K500 Pipe Fittings

Specifications : ASTM B366 / ASME SB366
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : eamless 1/2″ – 10″ , Welded 1/2″ – 48″
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

ASME SB366 K500 Monel Buttweld Fittings Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Monel Alloy K500 Pipe Fittings Available Types

Monel K500 Straight Tees
ASME SB 366 Alloy K500 Straight Crosses
ANSI/ASME B16.9 Monel K500 Collar Exporter
Monel Alloy K500 Swedge Nipple
ASTM A366 Monel K500 Pipe Nipples
K500 Monel Piggable Pipe Bends Stockist
ASTM A366 Alloy K500 Piggable Bend
Monel K500 Barrel Nipple
K500 Monel Buttweld Reducing Nipple
ASME B16.9 Alloy K500 Bend

ASTM A366 Monel K500 U bends
Monel K500 Long Radius Bend in India
K500 Monel Butt weld Collar Suppliers
ANSI B16.9 Monel K500 Welded Elbow Stockholder
Monel K500 Seamless pipe Elbow
Alloy K500 45 Deg Elbow Distributors
Monel K500 Butt weld Seamless 90 Deg Elbow
WERKSTOFF NR. 2.4375 Butt Weld Pipe Fittings
K500 Monel Pipe Fittings Dimensions
Schedule 10 Monel K500 Pipe Fittings Price List

Chemical Composition of Grade K500 Monel Alloy Pipe Fittings

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2

Mechanical Properties of ASTM B366 / SB 366 Monel K500 Pipe Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Monel K500 Pipe Fittings Applications

Application Industries
  • Oil and Gas Industry
  • Chemical Industry
  • Petrochemical Industry
  • Power Plant Industry
  • Refinery Industry
  • Food Processing Industry
  • Energy Industry
  • Aerospace Industry
  • Pulp & Paper Industry

Countries We Export Monel K500 Pipe Fittings

Europe, Kuwait, Bangladesh, UAE, Hong Kong, Poland, Bahrain, Jordan, Nepal, United States, Algeria, Yemen, Spain, Qatar, Ghana, Malaysia, Philippines, United Kingdom, Chile, Azerbaijan, Lithuania, Saudi Arabia, Iran, Trinidad & Tobago,Tunisia, Turkey, Brazil, Iran, Poland, Japan, France, USA, Belgium, Thailand, Estonia, Brazil, Vietnam, China, Chile, Costa Rica, Iran, Japan, Malaysia, Congo, Germany, Egypt, Tibet, United Arab Emirates, South Africa, South Korea, Ireland, Finland, Italy, Taiwan, Sweden, Czech Republic, Iraq, Puerto Rico, Austria, Ukraine, Mexico, Pakistan, Portugal, Netherlands, Denmark, Sri Lanka, Gabon, Kazakhstan, Bulgaria, Angola, Bhutan, Romania, Indonesia, Ecuador, Canada, Nigeria, Singapore, Argentina, Israel, Venezuela, Nigeria, Afghanistan, Bolivia, Peru, Russia, Switzerland, Libya, Kenya, Macau, New Zealand, Lebanon, Belarus, Mongolia, Croatia, Gambia, Morocco, Slovakia, Australia, Colombia, Norway, Oman, Hungary, Mexico, India, Zimbabwe, Namibia, Serbia, Greece.