Stainless Steel 304 Flanges

HomeStainless Steel 304 Flanges

304 Stainless Steel Flanges, AWWA Class D, ASTM A182 Back Flange 28 Inch, ASME B16.5 SS 304 Blind Flanges, UNS S30400 Weld Neck Flange, DIN 1.4301 Threaded Flange, PN 16, ASME SA182 F304 Plate Flange, DN 125 Supplier in Mumbai, India.

Shribhairav Forge is a famed manufacturer of Grade 304 Stainless Steel Flanges, which is often used when large quantities of steel are needed.RF, Dual Rated ASTM A182 F304 Blind Flange 150LB is the most common form of steel because its price is relatively low while it provides material properties that are acceptable for many applications. We are proudly the leading producer of Stainless Steel 304 Flanges in the country over the past decade. Our aim is to create the best products at reasonable rates for all. ANSI 304 Flat Flange, DIN 2501, DN50, PN16 contains approximately 0.05–0.25% carbon making it malleable and ductile. SS 304 WNRF Flange is a weld neck flange having a raised face. The welded neck provides extra grip in holding the pipes together, while the raised place helps in the attachment. GOST 08Х18Н10 Ring Type Joint Flanges has a relatively low tensile strength, but it is cheap and easy to form; surface hardness can be increased through carburizing.
Table Of Content

Case hardening processes in SA182 F304 SORF Flange harden only the exterior of the steel part, creating a hard, wear resistant skin (the “case”) but preserving a tough and ductile interior. ASTM A182 Grade F304 SWRF Flange, Stainless Steel 304l Flanges & Stainless Steel 316 Flange are not very hardenable; therefore, thick pieces cannot be through-hardened. Stainless Steel F304L WNRF Flange have a better hardenability, so they can through-harden and do not require case hardening. This property of SS 304 Weldo / Nipo Flanges can be beneficial, because it gives the surface good wear characteristics but leaves the core tough.

SS 304 Raised Face Slip On Flanges (SORF) Price, UNS S30400 Weld Neck Flanges Distributors, DIN 1.4301 Weldo Flange Trader, SUS 304 Nippolet Flange Dealer, Stainless Steel 304 Tongue & Groove Flange Manufacturer in India.

The rate at which Grade 304 Spacer Flanges is cooled through the eutectoid temperature affects the rate at which carbon diffuses out of austenite and forms cementite. Generally speaking, cooling swiftly will leave iron carbide finely dispersed in Gr. 304 Nippolet Flanges and produce a fine grained pearlite (until the martensite critical temperature is reached) and cooling slowly will give a coarser pearlite.

ASTM A182 Stainless Steel 304 Flanges Types

 A182 Stainless Steel 304 Blind Flanges

  • Stainless Steel 304 Blind Flanges
  • ASME B16.5 Blind Flanges
  • ASTM A182 F304 Blind Flanges
  • 304 Stainless Steel BLRF Flanges
  • SS UNS S30400 Blind Flanges
  • SS DIN 1.4301 Blind Flanges

ASTM A182 SS 304
Threaded Flange

  • Stainless Steel ASTM A182 F304 Threaded Flanges
  • ASME B16.5 Threaded Flanges
  • ASTM A182 SS F304 Threaded Flanges
  • SS UNS S30400 Threaded Flanges
  • DIN 1.4301 Threaded Flanges

ASTM A182 F304 Orifice Flange

  • Stainless Steel ASTM A182 F304 Orifice Flanges
  • ASME B16.5 Orifice Flanges
  • ASTM A182 SS F304 Orifice Flanges
  • SS DIN 1.4301 Orifice Flanges
  • UNS S30400 Orifice Flanges

ASTM A182 F304 Weld Neck Flange

  • Stainless Steel ASTM A182 F304 Weld Neck Flanges
  • ASME B16.5 Weld Neck Flanges
  • ASTM A182 SS F304 Weld Neck Flanges
  • SS UNS S30400 Weld Neck Flanges
  • DIN 1.4301 Weld Neck Flanges

ASTM A182 F304 Slip on Flange

  • ASTM A182 SS F304 Slip On Flanges
  • ASME B16.5 SORF Flanges
  • ASME SA182 SS F304 Slip On Flanges
  • UNS S30400 Slip On Flanges
  • DIN 1.4301 Slip On Flanges
  • SS ASTM A182 F304 Slip On Flanges

A182 F304 Long Weld Neck Flange

  • ASTM A182 SS F304 Long Weld Neck Flanges
  • B16.5 Stainless Steel 304 Long weld Neck Flanges
  • ASME SA182 SS F304 Long Weld Neck Flanges
  • S30400 Long Weld Neck Flanges
  • DIN 1.4301 Long Weld Neck Flanges

A182 F304 Spectacle Blind Flange

  • ASTM A182 SS F304 Spectacle Blind Flange
  • B16.5 Stainless Steel 304 Spectacle Blind Flange
  • ASME SA182 SS F304 Spectacle Blind Flanges
  • S30400 Spectacle Blind Flanges
  • DIN 1.4301 Spectacle Blind Flanges
  • SUS 304 Spectacle Blind Flanges

ASTM A182 F304 Socket Weld Flange

  • ASTM A182 SS F304 Socket Weld Flanges
  • ASME B16.47 Stainless Steel 304 SWRF Flanges
  • ASME SA182 SS F304 Socket weld Flanges
  • UNS S30400 Socket weld Flanges
  • DIN 1.4301 Socket weld Flanges
  • SS ASTM A182 F304 Socket weld Flanges

SS A182 F304 Reducing Flanges

  • ASTM A182 SS F304 Reducing Flanges
  • ASME B16.47 Stainless Steel 304 Reducing Flanges
  • ASME SA182 SS 304 Reducing Flanges
  • UNS S30400 Reducing Flanges
  • DIN 1.4301 Reducing Flanges
  • SS ASTM A182 F304 Reducing Flanges

Standard Specification For ASTM A182 Stainless Steel F304 Flanges

Specifications : ASTM A182 / ASME SA182
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Class / Pressure Rating : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Stainless Steel 304 Pipe Flanges Manufacturing Standards

ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100
304 Flanges Standard

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • AS 2129: Table D; Table E; Table H
  • B.S: BS4504 , BS3293, BS1560, BS10
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • American standard (ANSI)
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • British standard (BS)
  • German (DIN)
  • Any other specilised flanges
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276

ASME SA182 304 Stainless Steel Flanges Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10

Stainless Steel 304 Pipe Flanges Available Types

AISI 304 Stainless Steel Flanges
ASME SA 182 SS 304 Slip on Flanges
ANSI/ASME B16.5 SS 304 Weld Neck Flanges (WNRF) Exporter
Stainless Steel A182 F304 Blind Flanges
ASTM A182 Stainless Steel 304 Lap Joint Flanges
SS 304 Socket weld Flanges Stockist
SS ASTM A182 F304 Threaded Flanges
Stainless Steel 304 Hydraulic SAE Flanges
SS 304 Flexible Hose Flange
ASME B16.5 Stainless Steel 304 Plate Flanges

ASTM A182 F304 Stainless Steel Forged Flanges
Stainless Steel 304 Ring Type Joint Flange in India
Stainless Steel 304 Weldo Flange Suppliers
ANSI B16.9 SS 304 SORF Flange Stockholder
Stainless Steel 304 Screwed Flanges
SS 304 BLRF Flanges Distributors
SS 304 RTJ Flanges
Stainless Steel 304 WNRF Flange
304 Stainless Steel Screwed Flanges Dimensions
SS 304 Reducing Flanges Price List

Chemical Composition of Grade 304 Stainless Steel Flanges

Grade C Mn Si P S Cr Mo Ni N
SS 304 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 11 –

Mechanical Properties of ASTM A182 / SA 182 SS 304 Pipe Flanges

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Stainless Steel 304 Flanges Applications

Application Industries
  • Oil and Gas Industry
  • Chemical Industry
  • Petrochemical Industry
  • Power Plant Industry
  • Refinery Industry
  • Food Processing Industry
  • Energy Industry
  • Aerospace Industry
  • Pulp & Paper Industry

Stainless Steel Products

Stainless Steel Flanges

Products