UNS S31700 Reducer, ASTM A403 WP317 Fittings, ASME B16.9 SS 317 Pipe Elbow, Gr. 317 Stub End, Grade 317 Stainless Steel Pipe Fittings, 317 Buttweld Fittings Supplier in Mumbai, India.

Shribhairav Forge is a known trader of SS Grade 317 Pipe Fittings, which are connected to a tie rod or bolt. Low speeds and constant feeds will minimize this WP403 317 90 Deg Elbow tendency to work harden. Tougher with a long stringy chip, the use of chip breakers is recommended here in SS 317 Equal Tee. All common fusion and resistance methods forEqual & Unequal Cross except oxyacetylene welding have proven successful. These ASTM A403 317 Reducerare used on exterior walls of masonry buildings, for structural reinforcement.

These Stainless Steel 317 Stub End are similar to ring locked studs except that both threads have the same nominal diameter. Being visible, Stainless Steel 317 Long Radius Bend are made in a style that is decorative. Used in woodworking in combination with a carriage bolt; WP403 317 End Cap has a square hole in the centre into which the carriage bolt square fits. Prongs on Stainless Steel 317 Dish Cap bite into the wood preventing the bolt from spinning freely when a nut is being tightened. 

SUS 317 Pipe Cap Dealer, Stainless Steel 317 Welded Fittings , SS 317 Piggable Bend Trader, Stainless Steel 317 Seamless Fittings Price, SS 317 Lap Joint Stub Ends Distributors, Manufacturer in India.

Variations of these Grade 317 Stainless Steel Pipe Fittings include pin types, hydraulic, terminal types, full shank, reduced-shank nut ends, and studs designed for installation into extremely hard materials. This feature allows UNS S31700 Pipe Fittings to be installed into minimum size bosses.

ASTM A403 Stainless Steel 317 Pipe Fittings Types

 A403 Stainless Steel 317 Elbow

  • Stainless Steel 317 1D Elbow
  • ASME B16.9 Stainless Steel 317 1.5D Elbow
  • ASTM A403 WP317 Stainless Steel 3D Elbow
  • 317 Stainless Steel 5D Elbow
  • SS UNS S31700 Elbow
  • SS 317 Elbow

ASTM A403 SS 317 45 Deg Elbow

  • Stainless Steel ASTM A403 WP317 45 Deg Elbow
  • ASME B16.9 Stainless Steel 317 45 Deg. Elbow
  • ASTM A403 SS WP317 Elbow 45 Degree
  • SS UNS S31700 45° Elbow
  • DIN 1.4449 45 Deg. Elbows

ASTM A403 SS 317 90 Deg. Elbow

  • Stainless Steel ASTM A403 WP317 90 Deg Elbow
  • ASME B16.9 Stainless Steel 317 90 Deg. Elbow
  • ASTM A403 SS WP317 Elbow 90 Degree
  • DIN 1.4449 90° Elbow
  • UNS S31700 90 Deg Elbow

ASTM A403 SS 317 180 Deg Elbow

  • Stainless Steel ASTM A403 WP317 180 Deg Elbow
  • ASME B16.9 Stainless Steel 317 180 Deg. Elbow
  • ASTM A403 SS WP317 Elbow 180 Degree
  • SS UNS S31700 180° Elbow
  • DIN 1.4449 180 Deg. Elbows

ASTM A403 Stainless Steel 317 Tee

  • ASTM A403 SS WP317 Tee
  • ASME B16.9 Stainless Steel 317 Equal Tee
  • ASME SA403 SS 317 Unequal Tee
  • UNS S31700 Reducing Tee
  • SS DIN 1.4449 Buttweld Tee
  • SS ASTM A403 WP317 Pipe Tee

A403 SS 317 Concentric Reducer

  • ASTM A403 SS WP317 Concentric Reducer
  • B16.9 Stainless Steel 317 Concentric Reducer
  • ASME SA403 SS 317 Concentric Reducer
  • S31700 Concentric Reducer
  • SS DIN 1.4449 Concentric Reducer
Stainless Steel 304 Eccentric Reducer

A403 SS 317 Eccentric Reducer

  • ASTM A403 SS WP317 Eccentric Reducer
  • B16.9 Stainless Steel 317 Eccentric Reducer
  • ASME SA403 SS 317 Eccentric Reducer
  • S31700 Eccentric Reducer
  • SS DIN 1.4449 Eccentric Reducer
  • SUS 317 Eccentric Reducer
Stainless Steel 304 Long Radius Elbow

ASTM A403 Stainless Steel 317 Long Radius Elbow

  • ASTM A403 SS WP317 LR Elbow
  • ASME B16.9 Stainless Steel 317 90 deg LR Elbow
  • ASME SA403 SS 317 45 deg. Long Radius Elbow
  • UNS S31700 Long Radius Elbow
  • SS DIN 1.4449 Long Radius Elbow
  • SS ASTM A403 WP316Ti 180 deg LR Elbow
Stainless Steel 304 Short Radius Elbow

SS A403 WP317 Short Radius Elbow

  • ASTM A403 SS WP317 SR Elbow
  • ASME B16.9 Stainless Steel 317 90 deg Short Radius Elbow Elbow
  • ASME SA403 SS 317 45 deg. SR Elbow
  • UNS S31700 Short Radius Elbow
  • SS 317 Short Radius Elbow
  • SS ASTM A403 WP317 180 deg Short Radius Elbow
ASTM A403 Stainless Steel WP304 Stub End

ASTM A403 SS 317 Stub End

  • ASTM A403 SS WP317 Stub End
  • ANSI B16.9 Stainless Steel 317 Short Stub End
  • ASME SA403 SS 317 Long Stub End
  • SS UNS S31700 Stub Ends
  • DIN 1.4449 Stub End
ASTM A403 WP304 SS Cap

ASTM A403 Stainless Steel 317 Cap

  • ASTM A403 SS WP317 Cap
  • ASTM A403 SS WP317 Cap
  • ASME B16.9 Stainless Steel 317 End Cap
  • ASME SA403 SS 317 End Pipe Cap
  • Stainless Steel UNS S31700 Pipe End Cap
  • SS DIN 1.4449 Butt Weld Cap
ASTM A403 WP304 SS Cross

ASTM A403 SS 317 Cross

  • ASTM A403 SS WP317 Cross
  • ASME B16.9 Stainless Steel 317 Equal Cross
  • ASME SA403 SS 317 Unequal Cross
  • UNS S31700 Reducing Cross
  • SS 317 Buttweld Cross
  • SS ASTM A403 WP317 Pipe Cross

Standard Specification For ASTM A403 Stainless Steel WP317 Pipe Fittings

Specifications : ASTM A403 / ASME SA403
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

ASME SA403 317 Stainless Steel Buttweld Fittings Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS EN
SS 317 1.4449 S31700 SUS 317

Stainless Steel 317 Pipe Fittings Available Types

AISI 317 Stainless Steel Straight Tees
ASME SA 403 SS 317 Straight Crosses
ANSI/ASME B16.9 SS 317 Collar Exporter
Stainless Steel A403 WP317 Swedge Nipple
ASTM A403 Stainless Steel 317 Pipe Nipples
SS 317 Piggable Pipe Bends Stockist
SS ASTM A403 WP317 Piggable Bend
Stainless Steel 317 Barrel Nipple
SS 317 Buttweld Reducing Nipple
ASME B16.9 Stainless Steel 317 Bend

ASTM A403 WP317 Stainless Steel U bends
Stainless Steel 317 Long Radius Bend in India
Stainless Steel 317 Butt weld Collar Suppliers
ANSI B16.9 SS 317 Welded Elbow Stockholder
Stainless Steel 317 Seamless pipe Elbow
SS 317 Seamless 45 Deg Elbow Distributors
SS 317 Butt weld Seamless 90 Deg Elbow
Stainless Steel 317 Butt Weld Pipe Fittings
317 Stainless Steel Pipe Fittings Dimensions
Schedule 10 SS 317 Pipe Fittings Price List

Chemical Composition of Grade 317 Stainless Steel Pipe Fittings

GradeCMnSiPSCrMoNiN
SS 317
0.08 max2 max0.75 max0.045 max0.030 max18 – 208 – 11

Mechanical Properties of ASTM A403 / SA 403 SS 317 Pipe Fittings

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Stainless Steel 317 Pipe Fittings Applications

Application Industries
  • Oil and Gas Industry
  • Chemical Industry
  • Petrochemical Industry
  • Power Plant Industry
  • Refinery Industry
  • Food Processing Industry
  • Energy Industry
  • Aerospace Industry
  • Pulp & Paper Industry